CALL US IF YOU DO NOT SEE A KIT FOR YOUR SPECIFIC BIKE!
This is a universal nitrous system for efi
motorcycles.
Checkout the twin bottle busa video DynoTune Hayabusa twin bottle kit
video
This DynoTune dry kit
will add up to an additional 80HP to your Ride. Comes with eveything you need
for a complete installation for 1 bottle and bracket kits. This is ideal for
folks with a single high mount exhaust! This Dry kit uses your bikes EFI
sensors to add the additional fuel needed to make the Power! By passing the
cool nitrous charge past the Air Temperature sensor in the intake track, we can
fool the bikes EFI system into adding the little extra fuel you need to make
some sweet power! Note: Consult your factory manual to make sure you have a
"Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor).
Comes with three jet settings of 15HP, 30HP, and 40HP.
TL1000R shown above
See the ZX-14 kit as that
kit comes with custom bracket adaptors as shown
above.
Checkout the
twin bottle video for the ZX-14 here>> DynoTune twin bottle ZX-14 kit video
How do the bottles mount and get filled? Watch the
Video here>> "Mounting and Refilling"
Bottle twists on to mount so changing bottles is a ten second process,
great for the race track!
Kit Comes complete with instructions on how to use
your Horn or starter for nitrous activation making it a clean installation.
The Twin inlet system allows the user to configure the
inlet any way they want. Single or dual snorkel intakes, its all in the kit!
High Heat/Pressure teflon tubing inculded.
Note: In the Video, The
Purge kit, V nozzle and braided line from purge solenoid are optional.
Note: Some fabrication and mounting screws/hardware is required to
mount the billet bottle brackets. The frame or rear foot pegs are the best
location. If upgrading to the 20oz bottles make sure you have room for the
bottles as they are larger than the 12oz bottles.
The Base kit
includes the following:
-- 1 12oz black powder coated
Nitrous Bottles (Chrome/Brushed available)
-- 1 Billet bottle
mounting brackets
-- 1 two foot stainless bradied nitrous lines
-- 2 Nozzles with mounts
-- High flow Nitrous Solenoid
-- Three nitrous jets
-- Electrical kit with switch, terminals
etc.
-- High Pressure teflon tubing and compression fittings.
-- Nitrous bottle fill adaptor. Bottles simply twist off in seconds for
the ulitmate in quick filling.
The following options are
available:
-- 20oz bottles:Measure to make sure they
will fit your application as the bottles are large! 11.5" long x 3.25"
dia.
-- Diffrent color brackets now available!
-- Purge
kit with "V"nozzle, solenoid and two foot Braided line.
ATTENTION!!! NOTE: Old style bracket shown above. All the new
brackets shown below
will have the larger round knobs. The knobs are much easier to turn, will
not come off, and the brackets are thicker and stronger than ever! It comes
with a Gauge port built into the side of the bracket (1/8" NPT threads) plus
the standard outlet fitting on the opposite side. (Gauge sold separate) All new
kits will come with this style bracket(s).
