Pressure Transducer for N2O pressure or Boost/Fuel
(016)
THESE SENSORS ARE THE OLD GENERATION, MAKE SURE YOUR CONNECTOR LOOKS THE SAME AS THESE! THE NEW GENERATION SENSORS WITH CONNECTORS BUILT ONTO THE SENSOR, CALL US FOR THAT APPLICATION!
These are our famous Pressure Transducers used in our Nitrous, Boost, and Fuel pressure Gauges. Use this as a replament or buy a second one for use with measuing two pressures. Example, if you have a boost Pressure Gauge and you want to measure the fuel pressure using the same Gauge all you need to do is buy the transducer and use a switch. You can now switch between transducers to check fuel pressure and Boost at the flick of a switch. Check our link to "installation instructions" for details on wiring. Note: Make sure you do not mix up high presure transducers with low pressure transducers as the are not interchangable. These are for use with Dynotune Gauges only! The threads are 1/8" NPT male for the boost/low pressure and for the N2o/high pressure.Add the optional 16 foot wire harness if your adding this to do a dual sensor installation.
NOTE: Not to be used with data loggers as voltage output is very small IT WILL NOT WORK WITH ANY DATA LOGGER!
Miscellaneous :
Product Inquiry
|
|
Related Products :
|
