CALL US IF YOU DO NOT SEE A KIT FOR YOUR SPECIFIC BIKE!

This system is a twin bottle universal nitrous kit.

Checkout the twin bottle busa video DynoTune Hayabusa twin bottle kit video

This DynoTune dry Motorcycle nitrous oxide system will add up to an additional 80HP to your Ride. Comes with eveything you need for a complete installation. This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power! Note: Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of 15HP, 30HP, and 40HP.

How do the bottles mount and get filled? Watch the Video here>> "Mounting and Refilling" 

Bottles twist on to mount so changing bottles is a ten second process, great for the race track! Custom painted bottles will no longer be scratched!

The Motorcycle nitrous oxide system Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation.

The Twin inlet system allows the user to configure the inlet any way they want. Single or dual snorkel intakes, its all in the kit! High Heat/Pressure teflon tubing inculded.

Note: In the Video, The Purge kit, V nozzle and braided line from purge solenoid are optional.

Note: Some fabrication and mounting screws/hardware is required to mount the billet bottle brackets. The frame or rear foot pegs are the best location. If upgrading to the 20oz bottles make sure you have room for the bottles as they are larger than the 12oz bottles.

The Base motorcycle nitrous oxide kit includes the following:

-- 2 12oz black powder coated Nitrous Bottles (Chrome/Brushed available)

-- 2 Billet bottle mounting brackets

-- 2 two foot stainless bradied nitrous lines

-- 2 Nozzles with mounts

-- High flow Nitrous Solenoid

-- Three nitrous jets

-- Electrical kit with switch, terminals etc.

-- High Pressure teflon tubing and compression fittings.

-- Nitrous bottle fill adaptor. Bottles simply twist off in seconds for the ulitmate in quick filling.


The following options are available:

-- 20oz bottles:Measure to make sure they will fit your application as the bottles are large! 11.5" long x 3.25" dia. 

-- Diffrent color brackets now available!

-- Purge kit with "V"nozzle, solenoid and two foot Braided line.

This Nitrous oxide kit will work on any efi mototcycle.

ATTENTION!!! NOTE: Old style bracket shown above. All the new brackets shown below

will have the larger round knobs. The knobs are much easier to turn, will not come off, and the brackets are thicker and stronger than ever! It comes with a Gauge port built into the side of the bracket (1/8" NPT threads) plus the standard outlet fitting on the opposite side. (Gauge sold separate) All new kits will come with this style bracket(s).